Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
837
2 Specify the parameters, and click the [Add] button.
Server ID
"1" or "2" is displayed as the ID for unregistered servers. When a key server is registered for "1", "2" is
displayed.
The server ID for the master or the slave server is specified when creating the key group. Refer to
"11.2.6.6 Create Key Group" (page 841)
for details.
Domain Name / IP Address
Input the domain name (FQDN) or the IP address of the key server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6 addresses can
be used; "link local address", "global address", "unique local address", and "6to4 address". Refer to
"Available IPv6 Address" (page 757)
for details.
When the current setting is displayed, the IPv6 address is displayed as an abbreviation.
The following input conditions apply:
- For "Domain Name"
Up to 63 alphanumeric characters and symbols
- For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
- For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation (Setup Network Environment)" (page 757)
for details.
Port No.
Input the port number used to communicate with the key server.
The following input conditions apply:
- Numeric characters
- 1 - 65535
LAN Port
Select "MNT" or "RMT" for the LAN port that is to be used to communicate with the key server.
A confirmation screen appears.