Filter
Top Products
Chapter 9 Connectivity Management
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
372
• LUN Group
The names of the LUN groups with host affinity settings are displayed.
When LUNs are directly associated to CA ports (when LUN mapping is created) by an application other than
GUI, the field is blank.
• Host Response
One of the following host responses is displayed.
- Host response that is allocated to the host group
- Host response that is allocated to the host
- If all of the hosts are to be connected ("All" is displayed in the "Host" field), the host response that was
selected when setting the host affinity
• Solaris MPxIO
• HP-UX
• AIX EMPD (*1)
• AIX VxVM
• AIX Single Path
• VS850/SVC
• Host responses created in the ETERNUS DX Disk storage system
• Default
*1: EMPD: ETERNUS Multipath Driver
The following modifications are applied for the host response settings with firmware version V10L15 or later.
• "Others" is changed to "Default".
• "Windows EMPD", "Linux EMPD", and "Solaris EMPD" are deleted from the "Host Response" value.
However, these parameters are displayed if they are applied for host groups.
• The setting parameters for "Windows EMPD", "Linux EMPD", and "Solaris EMPD" are the same as "Default".