Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
827
11.2.5.3 Send Log
This function manually sends a storage system log to the remote server (AIS Connect server) when the AIS
Connect function is in operation.
The procedure to send log is as follows:
Procedure
1 Click [Send Log] in [Action].
→ A confirmation screen appears.
2 Click the [OK] button.
→ Sending log starts.
3 Click the [Done] button to return to the screen when starting this function in Step 1.
End of procedure
• Sending logs is only available when "AIS Connect" is enabled. Refer to "11.2.5.1 Setup AIS Connect
Environment" (page 821) for details.
• Check the connection to the AIS Connect server in advance. Refer to "11.2.5.4 Test Server Connectivity"
(page 828) for details. If a communication error occurs and a connection to the AIS Connect server cannot
be established, logs cannot be sent. A log that fails to be sent is not resent.
• If a send log request is already performed once log collection is complete, send log requests are not
performed.
This function collects logs (including I/O Module logs) at the time when performing the [Send Log] function.
Log files are divided into 640MB increments and sent to the AIS Connect server.