Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
766
7 Click the [Done] button to return to the [Network] screen.
End of procedure
11.2.3.5 Setup SNMP Agent MIB Access View
This function sets up the SNMP Agent MIB View.
MIB View is used for defining the accessible area in the Management Information Base (MIB) database, with
a tree type structure. Use this item when defining the accessible area in the MIB database.
Up to ten MIB Views, including the default view, can be created for each ETERNUS DX Disk storage system.
There are three types of default views: "ViewALL", "View-mib2", and "View-exmib".
The procedure to change the SNMP Agent MIB view is as follows:
Procedure
1 Click [Setup SNMP MIB View] in [Action].
2 Click the [Add] button.
• If the "SNMP Function" is disabled, the [Setup SNMP Manager] function cannot be used.
• The view name that is used in the settings in "11.2.3.6 Setup SNMP Agent User" (page 768)
or "11.2.3.6
Setup SNMP Agent User" (page 768) cannot be changed or deleted. However, note that the MIB View
(Subtree) can be changed.
• The default view can be changed or deleted.
Click the [View Name] link to edit the existing MIB View.