Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
572
Retained and deleted information when changing the port mode
The procedure to change the port mode is as follows:
Procedure
1 Click [Modify Port Mode] in [Action].
Port mode after modification
CA RA CA/RA Initiator
Port mode
before
modification
CA
– Mapping information
is deleted
Mapping information
is retained
Mapping information
is deleted
RA
Advanced Copy path
information is
deleted
–
• Advanced Copy
path information
is retained
• REC Line No. is
retained
• REC Transfer
Mode is retained
Advanced Copy path
information is
deleted
CA/
RA
• Mapping
information is
retained
• Advanced Copy
path information
is deleted
• Mapping
information is
deleted
• Advanced Copy
path information
is retained
• REC Line No. is
retained
• REC Transfer
Mode is retained
–
• Mapping
information is
deleted
• Advanced Copy
path information
is deleted
• If the port mode has been changed, the port parameter returns to the default setting. For REC line num-
ber and REC transfer mode, refer to "Retained and deleted information when changing the port mode"
(page 572).
• When changing the port mode for FC-Initiator port, delete the path group specified in the target port.
Refer to "11.2.11.3 Delete Storage Migration Path" (page 914)
for details.