Filter
Top Products
Chapter 10 Component Management
10.2 Functions in the Action Area for Component
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
705
The procedure to register a Dedicated Hot Spare is as follows:
Procedure
1 Select a drive (multiple selections can be made) that is to be used as a Dedicated Hot Spare
and click [Assign Dedicated HS] in [Action].
2 Select which RAID group to use the selected drive as a Dedicated Hot Spare for and click the
[Assign] button.
→ A confirmation screen appears.
3 Click the [OK] button.
→ Registration of the Dedicated Hot Spare starts.
4 Click the [Done] button to return to the [Disks] screen.
End of procedure
Select the same type of drives that configure the target RAID group. If multiple types of drives are
selected, the [Assign Dedicated HS] is not available.