Filter
Top Products
Chapter 4 Configuration Settings
4.1 Configuration Settings for Using Standard Volumes (When Using Host Affinity Settings)
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
66
4.1.2 When Host Groups are not Created (when Using the [Add Host] Function)
The following section describes the series of settings when using Standard volumes without creating host
groups.
Not only can new RAID groups be created, adding or changing volumes that are registered in existing RAID
groups can also be performed.
Create RAID Group
Create a RAID group (a group of drives that configures the RAID in the ETERNUS DX Disk
storage system
).
Refer to:
-
Create RAID Group
Create Volume
Create a volume (drive area in the RAID group). A volume is a structural unit of RAID that can be
recognized from the server. Select "Standard" for "Type".
Refer to:
-
Create Volume
Add Host
Add the information of any server that accesses the ETERNUS DX Disk storage system via the
ports. When adding a server, register a new host. Assign a host response when registering a
host.
Refer to:
- Add FC/FCoE Host
- Add iSCSI Host
- Add SAS Host
The "Add Host" functions are only displayed when the "Use "Add Host"" checkbox
is selected for the "Function to Add Host" field in "Web GUI Settings". This item is
not selected (not displayed) by default. Refer to "11.2.13.4 Setup Subsystem
Parameters" (page 935) for details.