Filter
Top Products
Chapter 9 Connectivity Management
9.1 Connectivity Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
384
• Status
The status of the target port is displayed.
• Port Mode
The mode of the target port is displayed.
- CA
- RA
- CA/RA
• Transfer Rate
The transfer speed of the target port is displayed. All transfers are full-duplex.
- Auto-negotiation
- 1Gbit/s
- 10Gbit/s
- 100Mbit/s
• Reset Scope
The reset scope of the target port is displayed.
Reset scope is the range where the command reset from the server is performed, when the target port is
connected to multiple servers. A "-" (hyphen) is displayed when the port mode is "RA".
- I_T_L (I: Initiator, T: Target, L: LUN)
Reset (cancel) the command request from the server that sent the command reset request.
- T_L (T: Target, L: LUN)
Reset (cancels) the command request from all of the servers that are connected to the port.
• Release Reservation if Chip is Reset
Whether the function to release the reservation status of the volume when the target port (chip) is reset is
enabled or disabled is displayed.
A "-" (hyphen) is displayed when the port mode is "RA".
• iSCSI Name
The iSCSI name of the target port is displayed.
• Alias Name
The Alias Name of the target port is displayed.
If the Alias Name is not specified, the field is blank.
• Bandwidth Limit
The bandwidth limit of the target port is displayed.
This item is displayed when the WAN bandwidth that can be used for REC is designated.
A "-" (hyphen) is displayed when the type is "1G iSCSI" or "10G iSCSI".
• MTU
The MTU size of the target port is displayed.
"Maximum Transmission Unit (MTU)" is the maximum amount of data that can be transmitted at the one
time over the communication network.
A "-" (hyphen) is displayed when the port mode is "CA".
• CHAP
When CHAP authentication for the target port is enabled, "ON" is displayed. If the authentication is
disabled, "OFF" is displayed.
When the "Port Mode" is "CA/RA", this item is displayed in "x / y" format.
x: The CHAP authentication status of the CA port ("ON" or "OFF")
y: The CHAP authentication status of the RA port ("ON" or "OFF")