Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
931
The following input conditions apply:
- For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
- For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
- For server name specification
The following input condition applies:
Up to 63 alphanumeric characters and symbols
LAN Port used for NTP
When the NTP server is enabled, select the port to be used for NTP connection.
- MNT
- RMT
A confirmation screen appears.
An error screen appears in the following conditions:
When a non-existent date has been specified in "New Time"
When "by day of the week" is selected in Daylight Saving Time, and the same day and time is input
for both start day/time and end day/time.
When "by Date" is selected in Daylight Saving Time, and the same date/time is input for both start
date/time and end date/time
When "by Date" is selected in Daylight Saving Time, and a nonexistent date has been specified as
the start date
When "by Date" is selected in Daylight Saving Time, and a non-existent date has been specified as
the end date
When the "NTP enabled " is selected for "NTP server" and MNT is selected as the "LAN Port used for
NTP", the IPv4 address of the NTP server and the broadcast address of the MNT port are the same
When the "NTP enabled " is selected for "NTP server" and RMT is selected as the "LAN Port used for
NTP", the IPv4 address of the NTP server and the broadcast address of the RMT port are the same