Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
606
The procedure to set the FC/FCoE host QoS is as follows:
Procedure
1 Select the FC/FCoE host to set the bandwidth limit (multiple selections can be made), and
click [Set FC/FCoE Host QoS] in [Action].
2 Select the FC/FCoE host bandwidth limit, and click the [Set] button.
• Bandwidth Limit
Select the maximum performance in IOPS (throughput value). If the bandwidth limit is not applied,
select "Unlimited".
→ A confirmation screen appears.
3 Click the [OK] button.
→ The FC/FCoE host QoS setting starts.
• Configure the port bandwidth limit on each port. Refer to the following sections for details:
- "9.2.7.9 Set FC Port QoS" (page 610)
- "9.2.7.10 Set iSCSI Port QoS" (page 611)
- "9.2.7.11 Set SAS Port QoS" (page 613)
- "9.2.7.12 Set FCoE Port QoS" (page 614)
• The LUN bandwidth limit can be configured in the LU QoS group. Refer to "9.2.7.2 Set Host-LU QoS" (page
599) for details.