Filter
Top Products
Chapter 7 Thin Provisioning Pool Management
7.1 Thin Provisioning Pool Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
204
The following items are displayed in the Main area:
• No.
The TPP number is displayed. Click this item to display the screen shown in "7.1.6 Thin Provisioning Pool
Detail (Basic)" (page 209).
• Name
The TPP name is displayed. Click this item to display the screen shown in "7.1.6 Thin Provisioning Pool
Detail (Basic)" (page 209).
• Disk Type
The type of drive that configures the TPP is displayed.
- Online
SAS disks
- Nearline
Nearline SAS disks
- SED
• RAID Type
The type of RAID group that configures the TPP is displayed.
- High Performance (RAID1+0)
- High Capacity (RAID5)
- High Reliability (RAID6)
- Mirroring (RAID1)
- Striping (RAID0)
• Status
The TPP status is displayed. Refer to "B.4 Thin Provisioning Pool Status" (page 976)
for detailed information
of TPP status.
• To use the ECO mode, follow the procedure in "11.2.8.1 Modify ECO Mode General Setting" (page 869)
and "11.2.8.2 Create ECO Mode Schedule" (page 871)
to perform the general ECO mode setup and create
an ECO mode schedule.
• To assign the ECO mode to a TPP, refer to "7.2.9 Assign ECO Mode Schedule (Thin Provisioning Pool)"
(page 242).