Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
588
3 Click the [OK] button.
→ Addition of the host response starts.
4 Click the [Done] button to return to the [Host Response] screen.
End of procedure
9.2.5.2 Delete Host Response
This function deletes a host response.
The procedure to delete a host response is as follows:
Procedure
1 Select the host response to be deleted (multiple selections can be made) and click [Delete
Host Response] in [Action].
→ A confirmation screen appears.
An error screen appears in the following conditions:
• When the "Name" matches with an existing host response name
• When the total number of host responses has exceeded the maximum number of host responses
for the ETERNUS DX Disk storage system
• When deleting an active host response, stop the access from the host group which the host response has
been assigned to.
• If an active host response is deleted, the host response setting will return to the initial state.
• The recommended pattern of the host response cannot be changed and deleted.