Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
869
3 Click the [OK] button.
→ Modification of the role settings starts.
4 Click the [Done] button to return to the [Define Role] screen.
End of procedure
11.2.8 ECO Mode Management
This section describes ECO mode management.
ECO mode management provides the following functions:
• Modify ECO Mode General Setting
• Create ECO Mode Schedule
• Delete ECO Mode Schedule
• Modify ECO Mode Schedule
11.2.8.1 Modify ECO Mode General Setting
This function enables or disables the ECO mode setting for ETERNUS DX Disk storage system.
ECO mode is not available for the following drives:
• Hot Spares (except Dedicated Hot Spares)
• SSD
• Drives in a RAID group that satisfy the following conditions:
- A RAID group where no volumes are registered
- A RAID group where SDPVs are registered
- RAID group that is registered as an REC Disk Buffer
To create a new ECO mode schedule, refer to "11.2.8.2 Create ECO Mode Schedule" (page 871).