Filter
Top Products
Chapter 8 Advanced Copy Management
8.1 Advanced Copy Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
270
8.1.6.1 Snap Data Pool
This function displays the SDP status.
SDP is the area used when in case executing SnapOPC and SnapOPC+ increases the amount of copy data and
exceeds the SDV capacity.
SDP becomes available when creating an SDPV. Created SDPV is automatically added to the SDP.
The following items are displayed in the Main area:
• SDP No.
The SDP number (fixed as "0") is displayed.
• Total Capacity
The total capacity of the SDP is displayed.
• Total Free Space
The total free space of the SDP is displayed.
• SDPE
Snap Data Pool Element (SDPE), the allocation unit for SDV, is displayed. Displayed with 1GB, 2GB, or 4GB.
• Unencrypted
- Total Capacity
The total capacity of unencrypted SDP is displayed.
- Total Used Capacity
The total used capacity of unencrypted SDP is displayed.
- Total Used Capacity (%)
The usage rate of unencrypted SDP is displayed.
- Used Host Capacity
The total capacity of the SDPE that is allocated for an unencrypted SDV where a capacity shortage
caused by data writing from the host has occurred is displayed.
- Used Copy Capacity
The total capacity of the SDPE that is allocated for an unencrypted SDV where a capacity shortage
caused by SnapOPC or SnapOPC+ has occurred is displayed.