Filter
Top Products
Chapter 10 Component Management
10.2 Functions in the Action Area for Component
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
698
10.2.2 Turn on Locator Beacon/Turn off Locator Beacon
This function blinks or turns off the locator beacon of the CE, the CM, or the SVC to identify the component that
requires maintenance.
The "IDENTIFY LED" blinks or is turned off at the following locations:
• The front cover of the CE
• The CM in the rear of the CE (for ETERNUS DX410 S2/DX440 S2 or ETERNUS DX8100 S2)
• The SVC in the rear of the CE (for ETERNUS DX8700 S2)
■ Turning on the LED
The procedure to turn on an LED is as follows:
Procedure
1 Click [Turn on locator beacon] in [Action].
→ A confirmation screen appears.
2 Click the [OK] button.
→ The locator beacon is turned on.
3 Click the [Done] button to return to the [Controller Enclosure] screen.
End of procedure
When using the ETERNUS DX8700 S2, SVC#0 and SVC#1 blink or are turned off together.
If the LED is already turned on, [Turn on locator beacon] cannot be selected.