Filter
Top Products
Chapter 7 Thin Provisioning Pool Management
7.1 Thin Provisioning Pool Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
205
• Total Capacity
The total capacity of TPP is displayed.
• ECO Mode Schedule
The ECO mode schedule that is assigned to the TPP is displayed.
If the ECO mode schedule is not assigned, the field is blank.
• ECO Mode Action
When the ECO mode is enabled in TPP, "ON" is displayed. If the ECO mode is disabled, "OFF" is displayed.
If the ECO mode is not assigned, a "-" (hyphen) is displayed.
• Motor Status
The disk motor status for the TPP is displayed.
- Active
The disk motors are activated.
- In the Boot Process
The disk motors are starting up.
- Idle
The disk motors are stopped.
- In the Stop Process
The disk motors are being stopped.
Filter setting
Filter Description
Name
Input the TPP name that is to be displayed.
When not using the TPP name for filtering, leave this item blank.
Disk Type Select the disk type that is to be displayed.
RAID Type Select the RAID type that is to be displayed.
ECO Mode Schedule Select the ECO mode schedule that is to be displayed.
Action Select the action that is to be displayed.