Filter
Top Products
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
862
• Recovery Mode
When "Enable" has been specified in the "RADIUS Authentication" field, select the desired operation
if RADIUS Authentication fails.
If RADIUS Authentication fails when "No" has been selected for "Recovery Mode", logging in to GUI
will not be available.
Selecting "Yes" is recommended.
- Yes (Communication error / Authentication error)
When communication with the RADIUS server fails or communication with the RADIUS server
succeeds but authentication fails, internal authentication is performed.
- Yes (Communication error)
When communication with the RADIUS server fails, internal authentication is performed.
- No
Even when communication with the RADIUS server fails, or communication with the RADIUS
server succeeds but authentication fails, internal authentication is not performed.
● Primary Server (required) / Secondary Server
• Domain Name / IP Address
Input the domain name or the IP address of the RADIUS server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6 addresses can
be used; "link local address", "global address", "unique local address", and "6to4 address". Refer to
"Available IPv6 Address" (page 757)
for details.
When the current setting is displayed, the IPv6 address is displayed as an abbreviation.
The following input conditions apply:
- For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
- For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
• Port No.
Input the port number that is used for RADIUS Authentication.
The following input condition applies:
- Numeric characters ("1" - "65535")
• LAN Port
Select the LAN port from "MNT" or "RMT" that is to be used for RADIUS Authentication.
• Authentication Mode
Select the authentication mode for RADIUS Authentication from "CHAP" and "PAP".
• Shared Secret
Input the same Shared Secret as the RADIUS server.
The following input condition applies:
- Up to 64 alphanumeric characters and symbols