Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.1 System Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
720
Service Contract Responsibility (Country Code : Country Name)
The country in which the support office for the ETERNUS DX Disk storage system is located is displayed in
"Country Code : Country Name" format.
Use LAN Port
The LAN port that is used for communication with the AIS Connect server is displayed.
- MNT
- RMT
SSL Server Certification
When SSL server certification is used for communication with the AIS Connect server, "Enable" is displayed.
When the SSL server certification is not used, "Disable" is displayed.
Auto Send Log
Whether the automatic log transmission is enabled or disabled is displayed.
When "Auto Send Log" is enabled, the ETERNUS DX Disk storage system automatically sends logs to the AIS
Connect server when a fail event (error level or warning level) occurs.
Proxy Server
The IPv4 address or the Fully Qualified Domain Name (FQDN) of the proxy server is displayed. If the proxy
server is not specified, the field is blank.
- IPv4 address
xxx.xxx.xxx.xxx
xxx: 0 - 255 (decimal)
- FQDN
Up to 63 alphanumeric characters and symbols
Port No.
The port number for the proxy server is displayed. If the proxy server is not specified, the field is blank.
Connection Type
The communication method for the proxy server is displayed. If the proxy server is not specified, the field is
blank.
- HTTP
- SOCKS
User Name
The user name for proxy server authentication is displayed. If the proxy server is not specified, the field is
blank.
Remote Session Permission
Remote Session
Whether to permit or forbid a remote session from the AIS Connect server is displayed.
Session Timeout
The timeout value for a remote session connection is displayed. If the timeout limit is not specified,
"Unlimited" is displayed.
If the time exceeds the specified value without a remote session connection, remote session permission is
disabled and the setting status changes to "Forbid".
This item is not displayed when "Service Contract Responsibility (Country Code : Country Name)" is not
specified from CLI.