Filter
Top Products
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
477
■ When adding a host by manually specifying the host
(1) Click the [Manual Input] tab.
(2) Click the [Add] button.
→ The [Add iSCSI Host] screen appears.
An error screen appears in the following conditions:
• When the "Host Group Name" is not entered
• When the "Host Group Name" does not satisfy the input conditions
• When the "Host Group Name" overlaps with an existing host group name
(Host group names cannot overlap with any other host group names, irrespective of the
interface types.)
• When the "IP Address" does not satisfy the input conditions
• When the "IP Address" is specified and an iSCSI host with the same "iSCSI Name" and "IP
Address" is already registered
• When the "IP Address" is not specified and an iSCSI host with the same "iSCSI Name" and "IP
Version" is already registered
• When the "Alias Name" does not satisfy the input conditions
• When the "Alias Name" overlaps the existing Alias name
• When the "CHAP User ID" does not satisfy the input conditions
• When the "CHAP Password" does not satisfy the input conditions
• When the "Confirm CHAP Password" does not satisfy the input conditions
• When the "CHAP Password" and the "Confirm CHAP Password" do not match
• When either of the "CHAP User ID" or the "CHAP Password" has been specified
• When a host cannot recognize some LUNs
• When no hosts are registered in a host group, or when nine or more hosts are registered in a
host group (for ETERNUS DX8700 S2, 65 or more hosts are registered in a host group)
• When the total number of hosts has exceeded the maximum number for the ETERNUS DX Disk
storage system