Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
919
3 Click the [Done] button to return to the [Path Group Detail Information] screen.
End of procedure
11.2.12 Utility Management
This section describes utility management.
Utility management provides the following functions:
Shutdown/Restart Storage System
Backup Configuration
Export Configuration
Start/Stop Performance Monitoring
11.2.12.1 Shutdown/Restart Storage System
When the ETERNUS DX disk storage system cannot be shut down directly, perform the shutdown or restart on
the screen.
Shutdown the ETERNUS DX Disk storage system
The procedure to shut down the ETERNUS DX Disk storage system is as follows:
Procedure
1 Click [Shutdown/Restart] in [Action].
[Stop] cannot be clicked if one or more source LUNs are selected for which the migration status is
unavailable for stopping. Note that if the migration status of some LUNs changes to unavailable
status after clicking [Stop], only the available LUNs among the selected LUNs are stopped. If LUNs for
which the migration status is not unavailable for stopping exist, a message that indicates that the
stopping process for these LUNs failed is displayed.
This function can be used regardless of whether the "Setup Power Management" is enabled or disabled.
Note that the ETERNUS DX Disk storage system may reboot automatically when "Setup Power
Management" is enabled. For example, an ETERNUS DX Disk storage system that is turned off reboots
when receiving a power on request from a server during turning off the power.
This function cannot be used when the ETERNUS DX Disk storage system is in the machine down status.
Restart the browser after completion of the process, and then access the login screen after rebooting of
the ETERNUS DX Disk storage system is complete.