Filter
Top Products
Chapter 6 RAID Group Management
6.1 RAID Group Status
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
168
• Usage
The usage of the RAID group is displayed.
- Standard
A RAID group that is used for creating "Standard", "SDV", or "SDPV" type volumes
- Standard / WSV
A RAID group that is used for creating "Standard", "WSV", "SDV", or "SDPV" type volumes
- WSV
A RAID group that is used for creating "WSV" type volumes
- Temporary
A RAID group that is temporarily created while LDE is being performed
- "-" (hyphen)
A RAID group that is not used
• RAID Type
The type of RAID group is displayed.
- High Performance (RAID1+0)
- High Capacity (RAID5)
- High Reliability (RAID6)
- Reliability (RAID5+0)
- Mirroring (RAID1)
- Striping (RAID0)
• Total Capacity
The total capacity of the RAID groups is displayed.
• Key Group
The setting status of the key group for the RAID groups is displayed.
- If the relevant RAID group is registered in the key group: "Enable"
- If one of the following conditions applies to the relevant RAID group: "Disable"
• No common key for SEDs is registered
• The relevant RAID group is not registered in the key group
Filter setting
Filter Description
Name
Input the RAID group name that is to be displayed.
When not using the RAID group name for filtering, leave this item blank.
Status Select the RAID group status that is to be displayed.
RAID Type Select the RAID type that is to be displayed.