Fujitsu DX440 S2 Computer Drive User Manual


  Open as PDF
of 1066
 
Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
788
The procedures to create SSL server key and the self-signed SSL certificate are as follows:
Procedure
1 Click [Create SSL Certificate] in [Action].
2 Specify the parameters, and click the [Create] button.
Key Length
Select the SSL server key length from "1024 bit", "2048 bit", and "4096 bit".
The SSL server key length is equivalent to the encryption level. In general, the longer the key is, the
higher the encryption level becomes (difficult to decrypt the encrypted data).
Common Name
Specify Main IP Address or Fully Qualified Domain Name (FQDN) for ports (MNT and RMT) which are
used to access from GUI via HTTPS connection (required).
There are two methods to specify the main IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", and "6to4
address". Refer to "Available IPv6 Address" (page 757)
for details. When the current setting is
displayed, the IPv6 address is displayed as an abbreviation.
The following input conditions apply:
- Main IP Address
For IPv4 address
- xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
- Class must be A, B, or C.
For IPv6 address
- xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
- Fully Qualified Domain Name (FQDN)
Alphanumeric characters (A - Z, 0 - 9)
Symbols (except "<", ">", "?", "!", "@", "#", "$", "%", "?", "\", "?", "&", and space)
Up to 63 characters
Subject Alt Name
Specify Main IP Address or FQDN for ports (MNT and RMT) which are used to access from GUI via
HTTPS connection.
There are two methods to specify the main IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", and "6to4
address". Refer to "Available IPv6 Address" (page 757)
for details. When the current setting is
displayed, the IPv6 address is displayed as an abbreviation.
- Main IP Address
The following input conditions apply:
For IPv4 address
- xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
- Class must be A, B, or C.