Filter
Top Products
Peak Detection
Data Explorer
™
Software User’s Guide 3-15
3
NOTE: Resolution-dependent settings do not apply to
Mariner chromatogram data or Voyager PSD data.
For more information, see Section 3.1.2, The
Resolution-Based Peak Detection Routine.
7. To apply settings to all traces, select Use same settings
for all traces in view.
To set parameters independently for all traces in a
window, deselect Use same settings for all traces in
view.
8. Type the Mass Resolution value to use for peak detection.
The default value for the type of data displayed is
acceptable for most applications. Defaults are listed in
“Basic Settings (spectrum data only)” on page 3-22.
NOTE: The Mass Resolution you set here is also used
by the Elemental Composition Calculator, the Elemental
Targeting Application, and the Default Smoothing
function. For more information, see Section 6.1, Using
the Elemental Composition Calculator, Section 6.6,
Using the Elemental Targeting Application, and
Section 5.7, Noise Filtering/Smoothing.
9. Click Apply to accept the parameters and leave the dialog
box open, or click OK to accept the parameters and close
the dialog box.