Filter
Top Products
Voyager Data Examples
Data Explorer
™
Software User’s Guide 7-21
7
Figure 7-21 Spectrum Peak Detection Setup—
Advanced Settings Tab
6. Set Minimum Area to 0.
7. Click the Basic Settings tab (see Figure 7-20 on
page 7-20), then set %Max Peak Area to 0 or 0.1.
8. Click Apply. Note that many peaks are added to the peak
list in the Output window.
For more information, see Section 3.2, Peak Detection.
Deisotoping 9. From the Peaks menu, select Peak Deisotoping.
The Deisotoping dialog box (Figure 7-14) is displayed.