Filter
Top Products
Peak Labeling
Data Explorer
™
Software User’s Guide 3-55
3
Figure 3-21 Chromatogram Peak Label Dialog Box
3. Select Enable Labeling.
4. Set the number of decimal points to be displayed.
5. Select Label Attributes:
• Overlapping—Allows labels to be displayed when
peaks are close together.
• Peak bounds—Displays peak start, peak end,
and baseline.
• Orientation—Specifies Horizontal, 45-degree, or
Vertical labels.
6. Select the label content to display, (for example,
Spectrum #, Time, Vial Number).
7. To create custom labels, select User Labels, then click
User Label Setup. See Section 3.5.3, Setting Custom
Peak Labels.