Filter
Top Products
Adjusting the Baseline
Data Explorer
™
Software User’s Guide 5-45
5
5.8 Adjusting the Baseline
This section includes:
• Using Baseline Offset
• Using Baseline Correction
• Using Advanced Baseline Correction
5.8.1 Using Baseline Offset
Use the Baseline Offset command to offset the y-axis in a
spectrum or to correct a sloping baseline:
1. Activate the window in which you want to perform the
offset.
NOTE: You can select a Chromatogram or a Spectrum
window. If you do not activate the correct type of
window before performing the next step, the software
does not select values when you click-drag on the
trace. For example, you must select a Spectrum
window before starting baseline offset on a spectrum.
2. Select Duplicate Active Trace from the Display menu to
keep the original data displayed after processing.
3. From the Process menu, select Baseline Offset.
The Baseline Offset dialog box (Figure 5-14) is
displayed.