- 103 -
User Exec
Display Message
When the optional arguments <slot/port> or <vlanid> are not used, the command displays the
following information.
Admin Mode: Indicates whether or not MLD Snooping is active on the switch.
Interfaces Enabled for MLD Snooping: Interfaces on which MLD Snooping is enabled.
Multicast Control Frame Count: Displays the number of MLD Control frames that are processed by
the CPU.
VLANs Enabled for MLD Snooping: VLANs on which MLD Snooping is enabled.
When you specify the <slot/port> values, the following information displays.
MLD Snooping Admin Mode: Indicates whether MLD Snooping is active on the interface.
Fast Leave Mode: Indicates whether MLD Snooping Fast Leave is active on the interface.
Group Membership Interval: Shows the amount of time in seconds that a switch will wait for a report
from a particular group on a particular interface, which is participating on the interface, before deleting
the interface from the entry. This value may be configured.
Max Response Time: Interface on which MLD Snooping is enabled.
Multicast Router Present Expiration Time: Displays the amount of time to wait before removing an
interface that is participating on the interface from the list of interfaces with multicast routers attached.
The interface is removed if a query is not received. This value may be configured.
When you specify a value for <vlanid>, the following information appears.
VLAN ID: VLAN Id.
MLD Snooping Admin Mode: Indicates whether MLD Snooping is active on the VLAN.
Fast Leave Mode: Indicates whether MLD Snooping Fast Leave is active on the VLAN.
Group Membership Interval: Shows the amount of time in seconds that a switch will wait for a report
from a particular group on a particular interface, which is participating in the VLAN, before deleting the
interface from the entry. This value may be configured.
Max Response Time: VLANs on which MLD Snooping is enabled.
Multicast Router Present Expiration Time: Displays the amount of time to wait before removing an
interface that is participating in the VLAN from the list of interfaces with multicast routers attached.
The interface is removed if a query is not received. This value may be configured.
7.2.8.2 show ipv6 mld snooping mrouter interface
The user can go to the CLI Privilege Exec to display information about statically configured multicast
router-attached interfaces, use the show ipv6 mld snooping mrouter interface Privilege command.
Syntax