- 958 -
11.8.5.9 Configuring PIM-SM Static RP Configuration Page
Configurable Data
IP Address - IP Address of the RP to be created or deleted.
Group - Group Address of the RP to be created or deleted.
Group Mask - Group Mask of the RP to be created or deleted.
Command Buttons
Submit - Attempts to create the specified static RP IP Address for the PIM-SM router. Configuration
changes take effect immediately. These changes will not be retained across a power cycle unless a
save is performed.
Delete - Attempts to remove the specified static RP IP Address for the PIM-SM router. Configuration
changes take effect immediately. These changes will not be retained across a power cycle unless a
save is performed.
11.9 IPv6 Multicast Menu
11.9.1 Managing MLD
11.9.1.1 Configuring MLD Global Configuration Page
Selection Criteria
Admin Mode - Select enable or disable from the pulldown menu to set the administrative status of
MLD in the router to active or inactive. The default is disabled.