- 201 -
Syntax
serviceport ipv6 enable
no serviceport ipv6 enable
no - This command is disable IPv6 operation on the service port.
Default Setting
None
Command Mode
Global Config
7.3.14.6 serviceport ipv6 address
Use this command to configure IPv6 global addressing (i.e. Default routers) information for the service
port.
Syntax
serviceport ipv6 address <address>/<prefix-length> [eui64]
no serviceport ipv6 address [<address>/<prefix-length>]
no - This command remove all IPv6 prefixes on the service port interface.
<address>: IPv6 prefix in IPv6 global address format.
<prefix-length>: IPv6 prefix length value.
[eui64]: Formulate IPv6 address in eui64 address format.
i
Multiple IPv6 prefixes can be configured for the service port.
Default Setting
None
Command Mode
Global Config
7.3.14.7 serviceport ipv6 gateway
Use this command to configure IPv6 gateway (i.e. Default routers) information for the service port.