Filter
Top Products
- 654 -
sFlow Receiver Timeout - The time (in seconds) remaining before the sampler is released and stops
sampling. A management entity wanting to maintain control of the sampler is responsible for setting a
new value before the old one expires. Allowed range is (0 to 4294967295 secs) A value of zero sets
the selected receiver configuration to its default values.
sFlow Receiver Maximum Datagram Size - The maximum number of data bytes that can be sent in
a single sample datagram. The manager should set this value to avoid fragmentation of the sFlow
datagrams. Default Value: 1400. Allowed range is (200 to 9116 )
sFlow Receiver Address - The IP address of the sFlow collector. If set to 0.0.0.0 no sFlow
datagrams will be sent.
sFlow Receiver Port - The destination port for sFlow datagrams. Allowed range is (1 to 65535 )
Non-Configurable Data
Receiver Index - The index of this receiver.
Receiver Owner - The entity making use of this sFlowRcvrTable entry. The empty string indicates
that the entry is currently unclaimed.
sFlow Receiver Timeout - The time (in seconds) remaining before the sampler is released and stops
sampling.
sFlow Receiver Maximum Datagram Size - The maximum number of data bytes that can be sent in
a single sample datagram.
sFlow Receiver Address - The IP address of the sFlow collector.
sFlow Receiver Port - The destination port for sFlow datagrams.
sFlow Receiver Datagram Version - The version of sFlow datagrams that should be sent.
Command Buttons
Submit - Send the updated data to the switch and cause the changes to take effect on the switch.
Refresh - Refresh the data on the screen with present state of data in the switch.
11.2.7.3 Configuring sFlow Poller Configuration Page
sFlow agent collects time-based sampling of network interface statistics and sends them to the
configured sFlow receivers. A data source configured to collect counter samples is called a poller.
Selection Criteria
sFlow Poller Datasource(Slot/Port) - sFlowDataSource for this sFlow sampler. This Agent will
support Physical ports only.