- 195 -
Command Mode
Privilege Exec
Display Message
Sampler Data Source: The sFlowDataSource (slot/port) for this sFlow sampler. This agent will
support Physical ports only.
Receiver Index: The sFlowReceiver configured for this sFlow sampler.
Packet Sampling Rate: The statistical sampling rate for packet sampling from this source.
Max Header Size: The maximum number of bytes that should be copied from a sampled packet to
form a flow sample.
7.3.13.5 set sflow rate
The user can go to the CLI Interface Configuration Mode to set sampling rate, use the sflow rate
<0-3600> interface configuration command. Use the no sflow rate return to default value zero.
Syntax
sflow rate <0-3600>
no sflow rate
Default Setting
0
Command Mode
Global Config
7.3.13.6 set sflow maximum header size
The user can go to the CLI Interface Configuration Mode to set maximum header size, use the sflow
maximum-header <20-256> interface configuration command. Use the no sflow maximum-header
return to default value 128.
Syntax
sflow sampler maxheadersize <20-256>
no sflow sampler maxheadersize
Default Setting
128
Command Mode
Interface Config