Fortinet 548B Switch User Manual


 
- 883 -
Other Designated Router - The interface is connected to a broadcast or NBMA network on
which other routers have been selected to be the Designated Router and Backup Designated
Router either. The router attempts to form adjacencies to both the Designated Router and the
Backup Designated Router.
The State is only displayed if the OSPFv3 admin mode is enabled.
Designated Router - The identity of the Designated Router for this network, in the view of the
advertising router. The Designated Router is identified here by its router ID. The value 0.0.0.0 means
that there is no Designated Router. This field is only displayed if the OSPFv3 admin mode is enabled.
Backup Designated Router - The identity of the Backup Designated Router for this network, in the
view of the advertising router. The Backup Designated Router is identified here by its router ID. Set to
0.0.0.0 if there is no Backup Designated Router. This field is only displayed if the OSPFv3 admin
mode is enabled.
Number of Link Events - This is the number of times the specified OSPFv3 interface has changed
its state. This field is only displayed if the OSPFv3 admin mode is enabled.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
11.6.7.6 Viewing OSPFv3 Interface Statistics Page
This screen displays statistics for the selected interface. The information will be displayed only if OSPFv3
is enabled.