- 111 -
10
Command Mode
VLAN Mode
7.2.8.19 set ipv6 mld mcrtrexpiretime
The user can go to the CLI Interface VLAN Configuration Mode to set the Multicast Router Present
Expiration time on a particular VLAN, use the set mld mcrtrexpiretime <vlanid> <0-3600> vlan
configuration command. Use the no set mld mcrtrexpiretime <vlanid> to return to default value 0.
Syntax
set mld mcrtrexpiretime <vlanid> <0-3600>
no set mld mcrtrexpiretime <vlanid>
Default Setting
0
Command Mode
VLAN Mode
7.2.9 MLD Snooping Querier
7.2.9.1 show ipv6 mld snooping querier
This command display MLD snooping querier global information on the system.
Syntax
show ipv6 mld snooping querier
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
MLD Snooping Querier Mode: Specify the Snooping Querier Address to be used as source address
in periodic MLD queries. This address is used when no address is configured on the VLAN on which
query is being sent.
Querier Address: Specify the Snooping Querier Address to be used as source address in periodic
MLD queries. This address is used when no address is configured on the VLAN on which query is
being sent.