Filter
Top Products
- 386 -
7.21.5.5 show policy-map
This command displays all configuration information for the specified policy.
Syntax
show policy-map [<policy-map-name>]
<policy-map-name> - is the name of an existing DiffServ policy.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Policy Name: The name of this policy.
Policy Type: The policy type, namely whether it is an inbound or outbound policy definition.
The following information is repeated for each class associated with this policy
(only those policy attributes actually configured are displayed):
Class Name: The name of this class.
Mark CoS: Denotes the class of service value that is set in the 802.1p header of outbound packets.
This is not displayed if the mark cos was not specified.
Mark IP DSCP: Denotes the mark/re-mark value used as the DSCP for traffic matching this class.
This is not displayed if mark ip description is not specified using the police-two-rate command, or if
policing is in use for the class under this policy.
Mark IP Precedence: Denotes the mark/re-mark value used as the IP Precedence for traffic
matching this class. This is not displayed if either mark DSCP or policing is in use for the class under
this policy.
Policing Style: This field denotes the style of policing, if any, used simple.
Committed Rate (Kbps): This field displays the committed rate, used in simple policing, single-rate
policing, and two-rate policing.
Committed Burst Size (KB): This field displays the committed burst size, used in simple policing.
Conform Action: The current setting for the action taken on a packet considered to conform to the
policing parameters. This is not displayed if policing is not in use for the class under this policy.
Conform COS Value: This field shows the priority mark value if the conform action is markcos.
Conform DSCP Value: This field shows the DSCP mark value if the conform action is markdscp.
Conform IP Precedence Value: This field shows the IP Precedence mark value if the conform action
is markprec.