Filter
Top Products
- 489 -
None
Command Mode
Interface Config
8.8.2.3 ip vrrp mode
This command enables the virtual router configured on the specified interface. Enabling the status field
starts a virtual router.
Syntax
ip vrrp <1-255> mode
no ip vrrp <1-255> mode
<1-255> - The range of virtual router ID is 1 to 255.
<no> - Disable the virtual router configured on the specified interface. Disabling the status field stops
a virtual router.
Default Setting
Disabled
Command Mode
Interface Config
8.8.2.4 ip vrrp authentication
This command sets the authorization details value for the virtual router configured on a specified
interface.
Syntax
ip vrrp <1-255> authentication <key>
no ip vrrp <1-255> authentication
<1-255> - The range of virtual router ID is 1 to 255.
<key> - A text password used for authentication.
<no> - This command sets the default authorization details value for the virtual router configured on a
specified interface.
Default Setting
no authentication
Command Mode