- 648 -
Selection Criteria
Slot/Port - Selects the interface for which data is to be displayed or configured.
Configurable Data
Port Description Enter the Description string to be attached to a port. It can be up to 64 characters in
length.
Non-Configurable Data
Slot/Port - Identifies the port
Physical Address - Displays the physical address of the specified interface.
PortList Bit Offset - Displays the bit offset value which corresponds to the port when the MIB object
type PortList is used to manage in SNMP.
IfIndex - Displays the interface index associated with the port.
Port Desciption - Description string attached to a port. It can be of up to 64 characters in length.
Command Buttons
Submit - Send the updated screen to the switch and cause the changes to take effect on the switch.
Refresh - Refresh the data on the screen with present state of data in the switch.
11.2.6.4 Configuring Cable Test Function Page
!
Below 10-Giga Interface doesn’t have this feature