- 139 -
Mode: Indicates whether or not the group is active.
MAC Update: Indicates whether or not mac-move-update is enable on the group.
Active Port: Display the active port number.
Backup Port: Display the active port number.
Current Active Port: Display the current active port number.
7.2.15.2 port-backup
Enable/Disable the port backup admin mode. Use ‘port-backup’ to enable the admin mode of function,
and use no command to disable the function.
Create/Destroy the port backup group. Use ‘port-backup group’ to create a group. Use no command to
destroy the group.
Enable/Disable a port-backup group. Use ‘port-backup group enable <group id> to enable individual
group, and use no command to disable a group.
Enable/Disable a port-backup group support the mac-move-update. Use ‘port-backup group <group id>
mac-move-update to enable individual group, and use no command to disable a group.
Syntax
port-backup [group | {enable <1 - 6>| <1 - 6> [failback-time <0 - 60>| mac-move-update]}]
no port-backup [group | {enable <1 - 6>| <1 - 6> [failback-time <0 - 60>| mac-move-update]}]
no - This command disables port-backup function.
Command Mode
Global Config
7.2.15.3 port-backup group
Set active port or backup port for a port-backup group. Use ‘port-backup group <group id> <active |
backup>’ to set the port to be configured active or configured backup port.
Syntax
port-backup group <1-6> {active | backup}
no port-backup group <1-6> {active | backup}
no - This command disables port-backup group function.
Command Mode
Interface Config