- 371 -
i
This command is not available on the Broadcom 5630x platform.
Syntax
match source-address mac <address> <macmask>
<address> - Specifies any layer 2 MAC address.
<macmask> - Specifies a layer 2 MAC address bit mask.
Default Setting
None
Command Mode
Class-Map Config
7.21.2.17 match srcip
This command adds to the specified class definition a match condition based on the source IP address of
a packet.
Syntax
match srcip <ipaddr> <ipmask>
<ipaddr> - specifies an IP address.
<ipmask> - specifies an IP address bit mask; note that although it resembles a standard subnet
mask, this bit mask need not be contiguous.
Default Setting
None
Command Mode
Class-Map Config
7.21.2.18 match srcl4port
This command adds to the specified class definition a match condition based on the source layer 4 port of
a packet using a single keyword or numeric notation or a numeric range notation.