- 137 -
port-monitor session <session-id> mode
no port-monitor session <session-id> mode
<session-id> - Session ID.
no - This command disables port-monitoring function for a monitor session.
Default Setting
None
Command Mode
Global Config
7.2.14 Link State
7.2.14.1 show link state
Show link state information.
Syntax
show link state
Command Mode
Global Config
Display Message
Admin Mode: the link state admin mode.
Group ID: The group ID for each displayed row.
Mode: This group was set which mode.
UpStream: Display such port was included to UpStream set.
DownStream: Display such port was included to DownStream set.
7.2.14.2 link state
Enable/Disable the link state admin mode. Use ‘link state’ to enable the admin mode of redundant
function, and use no command to disable the function.
Create/Destroy the link state group. Use ‘link state group’ to create a group. Use no command to destroy
the group.
Enable/Disable a link state group. Use link state group enable <group id> to enable individual group, and
use no command to disable a group.