Filter
Top Products
- 578 -
<areaid> - Area ID.
<neighbor> - Neighbor's router ID.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area ID: The area id of the requested OSPF area.
Neighbor Router ID: The input neighbor Router ID.
Hello Interval: The configured hello interval for the OSPF virtual interface.
Dead Interval: The configured dead interval for the OSPF virtual interface.
Iftransit Delay Interval: The configured transit delay for the OSPF virtual interface.
Retransmit Interval: The configured retransmit interval for the OSPF virtual interface.
Authentication Type: Shows the type of authentication the interface performs on LSAs it receives.
State: The OSPF Interface States are: down, loopback, waiting, point-to-point, designated
router, and backup designated router. This is the state of the OSPF interface.
Neighbor State: The neighbor state.
10.4.1.14 show ipv6 ospf virtual-link brief
This command displays the OSPFv4 Virtual Interface information for all areas in the system.
Syntax
show ipv6 ospf virtual-link brief
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area Id: Is the area id of the requested OSPFv3 area.
Neighbor: Is the neighbor interface of the OSPFv3 virtual interface.
Hello Interval: Is the configured hello interval for the OSPFv3 virtual interface.
Dead Interval: Is the configured dead interval for the OSPFv3 virtual interface.