Filter
Top Products
- 549 -
Neighbor State: State of neighbor cache entry. Possible values are Incomplete, Reachable, Stale,
Delay, Probe, and Unknown.
Age(Seconds): Shows the system uptime when the information for the neighbor was last updated.
10.3.1.4 show ipv6 interface neighbors static
This command display static neighbor cache table on the system each interface port.
Syntax
show ipv6 interface neighbors static
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
IPv6 Address: Specifies the IPv6 address of neighbor.
MAC Address: Specifies the MAC address of neighbor.
isRtr: Specifies the router flag.
Neighbor State: The state of the neighbor cache entry. Possible values are: Reachable, Delay.
Age Updated: The time in seconds that has elapsed since an entry was added to the cache.
10.3.1.5 show ipv6 ndp
This command displays NDP cache information for the management port.
Syntax
show ipv6 ndp
Default Setting
None
Command Mode
Privilege Exec
Display Message
IPv6 Address: The IPv6 address of the interface.