- 957 -
Selection Criteria
Slot/Port - Select the slot and port for which data is to be displayed. Slot 0 is the base unit.
Configurable Data
Hash Mask Length - Enter the C-BSR hash mask length to be advertised in bootstrap messages.
This hash mask length will be used in the hash algorithm for selecting the RP for a particular group.
The valid values are from (0 to 32). Default value is 30.
Priority - Enter the priority of C-BSR.
Command Buttons
Submit - Attempts to create the specified static RP IP Address for the PIM-SM router. Configuration
changes take effect immediately. These changes will not be retained across a power cycle unless a
save is performed.
11.8.5.8 Viewing PIM-SM BSR Candidate Summary Page
Non-Configurable Data
BSR Address - Displays the IP address of the Elected BSR.
BSR Priority - Displays the Priority of the Elected BSR.
BSR Hash Mask Length - Displays hash mask length of the Elected BSR.
Next bootstrap Message - Time (in hours, minutes, and seconds) in which the next bootstrap
message is due from this BSR.
Next Candidate RP Advertisement - Time (in hours, minutes, and seconds) in which the next
candidate RP advertisement will be sent.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.