Fortinet 548B Switch User Manual


 
- 866 -
11.6.2 Configuring IPv6 Interface Configuration Page
Selection Criteria
Interface - Selects the interface to be configured. When the selection is changed, a screen refresh
will occur causing all fields to be updated for the newly selected port. All physical interfaces are valid.
IPv6 Prefix - Specifies IPv6 prefix with prefix length for an interface. When the selection is changed
screen is refreshed and valid lifetime, preferred lifetime, on-link flag and autonomous flag will be
updated for selected IPv6 address.
Configurable Data
IPv6 - Specifies IPv6 protocol stack is Enable or Disable on this routing interface.
IPv6 Prefix - Specifies IPv6 prefix with prefix length for an interface.
EUI-64 - Specifies 64 bit unicast prefix.
Valid Lifetime by Prefix - Specifies router advertisement per prefix time to consider prefix valid for
purposes of on link determination. Valid lifetime must be in the range (0 to 4294967295)
Preferred Lifetime by Prefix - Specifies router advertisement per prefix time. An autoconfigured
address generated from this prefix is preferred. Preferred lifetime must be in range (0 to -1)
OnLink Flag by Prefix - Specifies selected prefix can be used for on-link determination. Default
value is enable. This selector lists the two options for on-link flag: enable and disable.
Autonomous Flag by Prefix - Specifies selected prefix can be used for autonomous address
configuration. Default value is disable. This selector lists the two options for autonomous flag: enable
and disable.
Routing Mode - Specifies routing mode of an interface. This selector lists the two options for routing
mode: enable and disable. Default value is disable.
Administrative Mode - Specifies administrative mode of an interface. This selector lists the two
options for administrative mode: enable and disable. Default value is enable.