Filter
Top Products
- 949 -
Slot/Port - Select the interface number from the dropdown menu. This is the interface that connects
to the neighbor router for the given source IP address.
Command Buttons
Submit - Send the updated configuration to the router. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
Delete - Delete the static entry with the selected Source IP address from the MRoute table.
11.8.3.5 Viewing Multicast Static Routes Configuration Page
Non-Configurable Data
Source IP - The IP Address that identifies the multicast packet source for this route.
Source Mask - The subnet mask applied to the Source IP address.
RPF Address - The IP address of the RPF neighbor.
Metric - The link state cost of the path to the multicast source. The range is 0 - 255.
Slot/Port - The number of the incoming interface whose IP address is used as RPF for the given
source IP address.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
11.8.3.6 Configuring Multicast Admin Boundary Configuration Page
The definition of an administratively scoped boundary is a mechanism is a way to stop the ingress and
egress of multicast traffic for a given range of multicast addresses on a given routing interface.
Selection Criteria
Group IP - Select 'Create Boundary' from the pulldown menu to create a new admin scope boundary,
or select one of the existing boundary specifications to display or update its configuration.