Filter
Top Products
- 339 -
Syntax
logging cli-command
Default Setting
None
Command Mode
Global Config
7.17.10 calendar set
This command is used to set the system clock.
Syntax
calendar set <hh:mm:ss> <1-31> <1-12> <2000-2099>
<hh:mm:ss> - hh in 24-hour format (Range: 0 - 23), mm (Range: 0 - 59), ss (Range: 0 - 59)
<1-31> - Day of month. (Range: 1 - 31).
<1-12> - Month. (Range: 1 - 12).
<2000-2099> - Year (4-digit). (Range: 2000 - 2099).
Default Setting
None
Command Mode
Privileged Exec
7.17.11 reload
This command resets the switch without powering it off. Reset means that all network connections are
terminated and the boot code executes. The switch uses the stored configuration to initialize the switch.
You are prompted to confirm that the reset should proceed. A successful reset is indicated by the LEDs
on the switch.
Syntax
reload