Fortinet 548B Switch User Manual


 
- 683 -
Multicast Poll Interval - Specifies the number of seconds between multicast poll requests expressed
as a power of two when configured in multicast mode. Multicasts received prior to the expiry of this
interval are discarded. Allowed range is (6 to 10). Default value is 6.
Unicast Poll Timeout - Specifies the number of seconds to wait for an SNTP response when
configured in unicast mode. Allowed range is (1 to 30). Default value is 5.
Unicast Poll Retry - Specifies the number of times to retry a request to an SNTP server after the first
time-out before attempting to use the next configured server when configured in unicast mode.
Allowed range is (0 to 10). Default value is 1.
Command Buttons
Submit - Sends the updated configuration to the switch. Configuration changes take effect
immediately.
11.2.13.2 Viewing SNTP Global Status Page
Non-Configurable Data
Version - Specifies the SNTP Version the client supports.
Supported Mode - Specifies the SNTP modes the client supports. Multiple modes may be supported
by a client.
Last Update Time - Specifies the local date and time (UTC) the SNTP client last updated the system
clock.
Last Attempt Time - Specifies the local date and time (UTC) of the last SNTP request or receipt of an
unsolicited message.
Last Attempt Status - Specifies the status of the last SNTP request or unsolicited message for both
unicast and broadcast modes. If no message has been received from a server, a status of Other is
displayed. These values are appropriate for all operational modes.
Other - None of the following enumeration values.