Filter
Top Products
To enable fonts from the PCL 6 printer driver for Windows
1. On the Start menu, point to Settings, and click Printers.
2. Select this printer and select Properties.
3. On the Configure tab, click More.
4. Select the Font DIMM check box.
5. In the Configure Font DIMMs dialog box, click Add to add the font file.
6. In the Add Font DIMM dialog box, browse to the location of the font file, select the font
file, and click OK.
7. In the Configure Font DIMMs dialog box, select the installed DIMM.
8. Click OK.
9. Print a configuration page.
Checking DIMM installation (HP color LaserJet 3700 only)
Check that the DIMMs are installed correctly and working.
To check DIMM installation
1. Turn the printer on. Check that the Ready light is on after the printer has gone through
the startup sequence. If an error message appears, the DIMM may have been
incorrectly installed.
2. Print a configuration page.
3. Check the Installed Personalities and Options section on the configuration page and
compare it with the configuration page printed before the DIMM installation.
4. If the amount of recognized memory has not increased: The DIMM may not be installed
correctly. Repeat the installation procedure. The DIMM may be defective. Try a new
DIMM.
84 Chapter 3 Installation and configuration ENWW