Filter
Top Products
Menu item Values Description
TOTAL COLOR PAGES Range: 0 -
9999999
Allows you to reset the page count after
replacing the formatter. The page count
should reflect the number of pages printed
on the print engine rather than the
formatter.
REFURBISH PAGE COUNT Range: 0 -
9999999
Allows the page count to be reset to the
original refurbished page count when the
printer is repaired.
TRANSFER KIT COUNT Range, for the:
HP 3500/3550:
0 - 60000
HP 3700/3550:
0 - 75,000
This item automatically resets to zero
when the transfer unit is replaced and the
user selects the choice to reset the
transfer count.
NOTE
This value is now stored on the DC
controller instead of the formatter. The
transfer kit count will not change the
actual page count of the transfer kit. The
transfer kit count can only be reset to zero
in the resets menu.
FUSER KIT COUNT Range, for the:
HP 3500: 0 -
60,000
HP 3700/3550:
0 - 75,000
Allows you to reset the page count of the
current fuser if the value is lost. This item
automatically resets to zero when the
fuser is replaced and the user selects the
choice to reset the fuser count.
SERIAL NUMBER XXXXXXXXXX Allows you to update the serial number if
you replace the formatter.
SERVICE ID YYDDD If you replace the formatter, this item
allows you to set the date to the date the
printer was first used, rather than the date
the new formatter was installed. See
Service ID, in this chapter for information
on the date format.
COLD RESET PAPER LETTER
A4
If the customer uses default paper size of
A4 (used in Europe), this item allows you
to reset the default if you replace the
formatter.
Table 7-49. Service menu (continued)
ENWW Control panel troubleshooting 421