Filter
Top Products
6. Align the print cartridge with the tracks inside the printer, and using the blue handle,
insert the print cartridge until it is firmly seated.
7. Firmly close the front door.
After a short calibration time, the control panel should display Ready.
NOTE
If a cartridge is in the wrong slot or the wrong type for the printer, the control panel will
display the message, INCORRECT <COLOR> or Incorrect supplies.
8. Installation is complete. Place the used print cartridge in the box in which the new
cartridge arrived. See the enclosed recycling guide for recycling instructions.
9. If you are using a non-HP print cartridge, check the printer control panel for further
instructions.
For additional help, go to http://www.hp.com/support/clj3500 for the HP Color LaserJet 3500
series printer, to http://www.hp.com/support/clj3550 for the HP Color LaserJet 3550 series
printer or to http://www.hp.com/support/clj3700 for the HP Color LaserJet 3700 series printer.
Replacing the transfer unit
Replace the transfer unit when the printer control panel displays REPLACE TRANSFER
KIT. The image transfer kit contains a replacement transfer unit for this printer.
WARNING!
Remove any jewelry or any other metal items from your body to avoid electric shock.
ENWW Replacing supply items 99