Filter
Top Products
Message Description Action
UNAUTHORIZED SUPPLY
IN USE
alternates with
Ready
The printer has detected that a non-
HP supply is currently installed and
press
(override) was pressed.
If you believe you purchased an
HP supply, please call the HP fraud hotline
at 1-877-219-3183.
Service or repairs required as a result of
using non-HP supplies are not covered
under HP warranty.
UNSUPPORTED DATA ON
<FS> DIMM IN SLOT X
alternates with
To clear press
HP 3700 only.
The data on the DIMM is not supported
(although the DIMM itself may be
supported).
Press to clear this message.
or
Press S
TOP
to continue printing.
USE TRAY X
<TYPE> <SIZE>
The printer is offering a selection of
alternate paper to use for the print job.
1. If desired, use and to highlight a
different size or type, and then press
to select the size or type.
2. Press
to return to the previous size
or type.
Wait for printer
to reinitialize
Settings have been changed before the
printer automatically restarts, or external
device modes have changed.
No action necessary.
NOTE
Not all messages are described in the tables; those messages that are not listed are self-
explanatory.
Numerical printer messages
The following table lists the numerical control panel messages. The alphabetical messages
are listed in the previous table.
Table 7-2. Alphabetical printer messages (continued)
ENWW Printer error troubleshooting 327